0.55 kW Cutting Mill Getecha Type SRS 100
Stock #U2304-1
Used horizontal cutting mill by Getecha (Germany) type SRS 100 A2. Mill has feeding inlet with diameter 50 mm. Milling chamber is designed in stainless steel and has internal diameter 100 mm x length 100 mm. Rotor is designed in non-corrosive steel and has 4 knives and is driven by gearbox and electric motor 0.55 kW, 1375 rpm, 230-400 V, 50 hz. Working rotation of rotor up to 127 rpm. Mill has one static knife. Bottom discharge through screen. Outlet discharge has diameter 55 mm. Mill is mounted on mobile platform. Has start/stop control and stainless steel cover with sound insulation.
Location: Perry Poland Warehouse
Add to Cart
View Details
0.55 kW Cutting Mill Getecha Type SRS 100
Stock #U2304-14
Used horizontal cutting mill by Getecha (Germany) type SRS 100 A1.10. Mill has two feeding inlets, each with diameter 40 mm. Milling chamber is designed in stainless steel and has internal diameter 100 mm x length 100 mm. Rotor is designed in non-corrosive steel and has 4 knives and is driven by gearbox and electric motor 0.55 kW, 1375 rpm, 230-400 V, 50 hz. Working rotation of rotor up to 127 rpm. Mill has one static knife. Bottom discharge through screen. Outlet discharge has diameter 55 mm. Mill is mounted on mobile platform. Has start/stop control and stainless steel cover with sound insulation.
Location: PL
Add to Cart
View Details
Hp 10 CMB Blade Grinder Type MS30
Stock #VB0007-145
Used CMB blade grinder-Type MS30-Hopper opening dimension : 300 x 300 mm-Control : motor : Hp 10 - Rpm 500 - 3x 220/380 volts
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
Hp 10 Mild Steel Cumberland Bade Mill Type 56T Granulator
Stock #VB0001-12
Used mild steel Cumberland blade mill type 56T Granulator Hp 10. Unit has (3) rotor blades. Milling chamber measures 200mm diameter x 1450mm long. Driven by 7.5kW/10HP 380/660 Volt 975 rpm motor.
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
Hp 10 Mild Steel Tria Blade Mill
Stock #VB0081-01
Used Mild steel TRIA blade mill Hp 10-Type 35-30/BM-Year 2004-Motor : Hp 10 - Rpm 1500 - 400/690 volts-Opening dimension : 320 x 330 mm
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
Stainless Steel Amap Cutter
Stock #VB0007-53
Used Stainless steel AMAP cutter. Tank diameter approximateyl 580 mm. Approximate height 110 mm. Unit has (3) blades, approximately 230 mm diameter
Location: NEUVILLE EN FERRAIN - FRANCE
Add to Cart
View Details
5 HP 10" X 5" Plastic Cutter
Stock #U2094-3
Used vertical plastic cutter polish made. Machine is driven by electric motor with power 4 kW, 1440 rpm, 50 Hz, 220/380V. Inlet dimensions: width 270 mm x 140 mm height. Milling chamber has a internal diameter 275 mm. Rotor has 3 knives. On milling chamber walls are mounted 3 static knives. Bottom side discharge. Dimensions: 800x400x950 mm.
Location: Perry Poland Warehouse
Add to Cart
View Details
5 HP 10" X 5" Plastic Cutter
Stock #U2143-14
Used vertical plastic cutter polish made. Machine is driven by electric motor with power 4 kW, 1440 rpm, 50 Hz, 220/380V. Inlet dimensions: width 270 mm x 140 mm height. Milling chamber has a internal diameter 275 mm. Rotor has 3 knives. On milling chamber walls are mounted 3 static knives. Bottom side discharge. Dimensions: 800 mm x 400 mm x 950 mm.
Location: Perry Poland Warehouse
Add to Cart
View Details
5 HP 7" X 10" Mecanofil Cutter
Stock #U2085-10
Used carbon steel cutter for plastics made by Mecanofil (Spain) with feeder screw conveyor. Screw feeder conveyor driven by 0,55 kW motor via bevel gearbox. Grinding chamber dimnesions: length 250 mm x diameter 170 mm. Has 2 static blades and screen perforation 6 mm. Rotor with 4 blades is driven by belt gearbox and elec. Motor 4 kW. Mounted on carbon steel frame. Includes control panel. Shipping dimensions: width 1200 mm x depth 1800 mm, height 1900 mm. No documentation. Weight: 720 kg. New 1999. No technical documentation.
Location: Perry Poland Warehouse
Add to Cart
View Details
10 HP 12" X 7" Plastic Cutter
Stock #U2143-13
Used vertical plastic cutter polish made. Machine is driven by electric motor with power 7,5 kW. Inlet dimensions: width 300 mm x 180 mm height. Rotor has 3 knives. On milling chamber walls are mounted 4 static knives. Milling chamber dimensions: diameter 290 x height 120 mm. Bottom side discharge. Mounted on tripod. Dimensions: 900 mm x 700 mm x 1150 mm.
Location: Perry Poland Warehouse
Add to Cart
View Details
10 HP Model UP755 Under-The-Press Granulator
Stock #V21537
Used Wortex model UP755 Under-The-Press granulator. Includes infeed paddle wheel assist, 10 hp rotor motor and 1 hp pull roll motor with 28.8/14.4 and 3.7/1.4 amps. Designed for blower discharge but no blower included. Granulator is mounted on casters.
Location: South USA
Add to Cart
View Details
15 HP 12" X 16" Pre-Crusher
Stock #U2143-9
Used vertical pre-crusher for plastics. Polish made. Machine has a milling chamber with internal diameter 500 mm. At the bottom of milling chamber there is a rotor with two blades. Rotor is belt driven by electric motor 11 kW, 1460 rpm, 380 V, 50 HZ. Top feeding inlet with dimensions 300 mm x 400 mm and bottom side discharge through the screen. Mounted on integrated pedestal.
Location: PL
Add to Cart
View Details
1 HP Precision Air Conveyance Corp. Model 78FSP Inline Film Chopper
Stock #ZP60836
Used Precision Air Conveyance Corp. Model 78FSP inline film chopper. S/N PQ-9534F. Equipped with 2 knife open rotor, 1 bed knife, 4" diameter inlet and outlet. 1 HP, 115/230/460 volt, 1725 rpm motor. Includes inlet muffler box and disconnect switch. Mounted on caster plate base.
Location: Midwest USA
Add to Cart
View Details
5 HP 8" X 10" Nelmor Model 810RGII Plastics Granulator
Stock #C9101J-003
Used Nelmor Granulator. Model 810RGII, Serial #23195. New 1985 Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor460/3/60. Unit is factory sound enclosed, and is set up for veyor discharge. Hopper tilts open for quick clean out. With motor starter.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
5 HP 8" X 10" Nelmor Model 810RGII Plastics Granulator
Stock #C9101J-002
Used Nelmor Granulator. Model 810RGII, Serial #23190. New 1985. Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor, 460/3/60. Unit is factory sound enclosed and is set up for veyor discharge. Hopper tilts open for quick clean out. With motor starter.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
5 HP 8" X 10" Nelmor Model 810RGII Plastics Granulator
Stock #C9101J-004
Used Nelmor Granulator. Model 810RGII, Serial #23197. New 1985. Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor, 460/3/60. Unit is factory sound enclosed and is set up for veyor discharge. Hopper tilts open for quick clean out.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
5 HP 8" X 8" Polymer Systems Model HM-W88 Hot Melt Granulator
Stock #M2813J-006
Used Polymer Systems hot melt Granulator. Model HM-W88, Serial #HMGW881829. Has an 8" X 8" throat opening with a 2-knife open rotor. Granulator has a 2-1/2" X 8" top feed opening and a jacketed cutting chamber. Driven by a 5 HP motor, 460/3/60, 6.6 amps. Grinder is a low profile type mounted on casters and is set up for an air veyor discharge. Unit has approximately 5/16" screen, motor starters and operator controls.
Location: On Site at Perry (Hainesport, NJ - USA)
Add to Cart
View Details
20 HP 12" X 48" Ball & Jewell Model LT-1248 Granulator
Stock #ZP60555-2
Used Ball & Jewell model LT-1248 Granulator with feed rolls. Has 12" X 48" feed throat opening with 3-knife open rotor and 2 bed knives. Driven by dual 10 HP motors, 230/460 volt, 1170 rpm. Has 7.5" X 47" feed rolls. Includes motor starter and granulator controls with interlocked 5 HP blower starter.
Location: Midwest USA
Add to Cart
View Details