Dispersion Mixers - Post Europe

Dispersion Mixers - Post Europe - Czech & Slovakia

IKA Model T65 Basic Ultra-Turrax Laboratory S/S High Shear Mixer

IKA Model T65 Basic Ultra-Turrax Laboratory S/S High Shear Mixer

Stock #H4320

Little used IKA Model T65 Basic Ultra Turrax multifunctional laboratory stainless steel (AISI 316L) high shear mixer. Suitable for the widest range of application - mixing, emulsifying, homogenizing, desintegrating, dissolving. Capacity 2 litre up to 50 litre. Has a Ultra-Turrax head model G65G with dispersing element for coarse preparation, head outer diameter 65 mm. Basic type of drive with the fixed speed 7200 rpm. Driven via gearbox by el. motor 1,5kW/400V or 230V/50Hz/2850 rpm. Includes Schneider start/stop panel. Mounted on telescopic base stand model T653, total height of the stand 1200 mm.

Location: Perry Czech Warehouse

Add to Cart View Details

4.0 kW Stainless Steel Dissolver-Stand Agitator

4.0 kW Stainless Steel Dissolver-Stand Agitator

Stock #HG62381

Unused stainless steel dissolver-stand agitator. Toothed disc type of agitator outer diameter approx. 180 mm driven by el. motor 4,0kW,50Hz. Shaft speed 200-1000 rpm. Mounted on stainless steel/carbon steel stand with manually operated raise and lower. Stand has fixing mechanism for cans. Can is not included. Includes start/stop panel with frequency converter..

Location: cz

Add to Cart View Details

5.5 kW Profarb Model PVM G-1000 Butterfly Mixer

5.5 kW Profarb Model PVM G-1000 Butterfly Mixer

Stock #HG62294

Used Profarb model PVM G-1000 stainless steel butterfly mixer. Stainless steel mixing shaf has butterfly type of agitator with diameter 600 mm. The agitator is driven by a 5.5 kW, 1460 rpm, 400 V, 50 Hz motor through gearbox, the final rpms are from 68 to 226 rpm. Has hydraulically lifted arm, the minimum/maximum height of the agitator from the floor is approx. 286/1286 mm. Includes integrated lid, can holding device and control panel.

Location: Central Europe

Add to Cart View Details

5.5 kW Ytron Mdl ZC 5.50FC Powder Disperser

5.5 kW Ytron Mdl ZC 5.50FC Powder Disperser

Stock #HG59794

Used powder disperser made by Ytron model ZC 5.50FC. Diameter of rotor is 95 mm and stator is 89 mm. Rotor is driven by EL. Engine 5,5 kW, 400 V, 100 HZ, IP55. Machine is equipped hopper 350 L and control panel with touch screen.

Location: CZECH REPUBLIC

Add to Cart View Details

7.5 kW PERRYmix Model DS-200 Dissolver, New

7.5 kW PERRYmix Model DS-200 Dissolver, New

Stock #HG62018

Brand new stainless steel PERRYmix dissolver model DS-200, working capacity up to 400 L depending on dispersed product viscosity. Stainless steel din 1.4301 mixing shaft with stainless steel toothed disc agitator diameter 250 mm driven by KEM EL. Motor 7,5kW/3PH/400V/50HZ/IP54/1475rpm. Equipped by LSCT650-4007 frequency convertor and then shaft rotates from 120 to 1500 rpm. Hydraulically lifted arm. Can holding/fixing device included. Also includes local control panel and electrical switchboard. Height 1720 mm and 2950 mm when lifted. Floor space approx. 600 X 1500 mm. Technical documentation and CE declaration of conformity is supplied with machine. Mixing can is not included.

Location: Central Europe

Add to Cart View Details

15.0 kW Perry Model DK250 Z Batch Process Basket Mill, New

15.0 kW Perry Model DK250 Z Batch Process Basket Mill, New

Stock #HG59793

New stainless steel Perry batch process basket Mill (top Mill) model DK250. Mill is suitable for processing paints and pigments preparation in moveable cans capacity up to 280 litre. Stainless steel Rotary slotted basket has diameter 350 mm and volume approximately 9 litres. Rotating shaft is driven by EL motor 15,0 kW/3X400V/50HZ. Equipped by Moeller frequency converter. Hydraulically lifted arm. Can holding/fixing device included. Also includes local control panel and external electrical switchboard. No mixing tank included. Technical documentation and CE declaration of conformity is supplied with machine.

Location: Central Europe

Add to Cart View Details

15.0 kW PERRYmix Model DK250 Z Batch Process Basket Mill, New

15.0 kW PERRYmix Model DK250 Z Batch Process Basket Mill, New

Stock #HG62201

Brand new stainless steel PERRYmix batch process basket mill model DK-250 Z, recommended working capacity 280 litre. Basket mill is suitable for griding paints or similar products which do not contain dispersion binders. Stainless steel basket has diameter 350 mm and volume 9 litre. Mixing shaft is driven by el. motor 15 kW. Hydraulically lifted arm. Includes can holding/fixing device, local control panel and external exlectrical switchboard, jacketed mixing can 280 litre. Technical documentation and CE declaration of conformity are supplied with machine.

Location: Central Europe

Add to Cart View Details

15.0 kW PERRYmix Model DS-250 Dissolver, New

15.0 kW PERRYmix Model DS-250 Dissolver, New

Stock #HG59617

Brand new stainless steel PERRYmix dissolver model DS-250, working capacity up to 500 L depending on dispersed product viscosity. Stainless steel mixing shaft with stainless steel toothed disc agitator diameter 300 mm driven by KEM EL. Motor 15kW/3PH/400V/50HZ/IP54/1475rpm. Equipped by Moeller frequency converter and then shaft rotates from 200 to 1600 rpm. Hydraulically lifted arm. Can holding/fixing device included. Also includes local control panel and electrical switchboard. Height 1870 mm and 3050 mm when lifted. Floor space 700 X 1600 mm. Technical documentation and CE declaration of conformity is supplied with machine. Mixing can is not included.

Location: Central Europe

Add to Cart View Details

30.0 kW GLOBIMIX/TEJA Model DDK-30-1,5/500-V Dissolver

30.0 kW GLOBIMIX/TEJA Model DDK-30-1,5/500-V Dissolver

Stock #HG62425

Used stainless steel GLOBIMIX/TEJA (Poland) vakuum dissolver model DDK-30-1,5/500-V. Stainless steel din 1.4301 mixing shaft with stainless steel toothed disc agitator diameter 450 mm driven by EL. Motor 30,0kW/3PH/400V/50HZ/IP55/1480rpm. Equipped by frequency convertor and then shaft rotates from 0 to 1500 rpm. The second mixing element type single anchor with teflon scraper. Annchor rotation 17 rpm, driven with el. motor. Hydraulically lifted arm. Can holding/fixing device included. Also includes local control panel and electrical switchboard. Height 2050 mm. Floor space approx. 3100 X 1600 mm. Technical documentation and CE declaration of conformity are supplied with machine. Included : 1x mixing can, 1 x vacuum pump, 3 x Sandpiper pump,

Location: Central Europe

Add to Cart View Details

30.0 kW PERRYmix Model DS-300 Dissolver, New

30.0 kW PERRYmix Model DS-300 Dissolver, New

Stock #HG62154

Brand new stainless steel PERRYmix dissolver model DS-300 Z, working capacity up to 1000 L depending on dispersed product viscosity. Stainless steel din 1.4301 mixing shaft with stainless steel toothed disc agitator diameter 400 mm driven by EL. Motor 30,0kW/3PH/400V/50HZ/IP54/1475rpm. Equipped by frequency convertor and then shaft rotates from 120 to 1200 rpm. Hydraulically lifted arm. Can holding/fixing device included. Also includes local control panel and electrical switchboard. Height 2050 mm and 3200 mm when lifted. Floor space approx. 800 X 1500 mm. Technical documentation and CE declaration of conformity are supplied with machine. Mixing can is not included.

Location: Central Europe

Add to Cart View Details

37.0 kW PERRYmix Model DS-300 Dissolver, New

37.0 kW PERRYmix Model DS-300 Dissolver, New

Stock #HG62156

Brand new stainless steel PERRYmix dissolver model DS-300 Z, working capacity up to 1200 L depending on dispersed product viscosity. Stainless steel din 1.4301 mixing shaft with stainless steel toothed disc agitator diameter 400 mm driven by EL. Motor 37,0kW/3PH/400V/50HZ/IP54/1475rpm. Equipped by frequency convertor and then shaft rotates from 120 to 1200 rpm. Hydraulically lifted arm. Can holding/fixing device included. Also includes local control panel and electrical switchboard. Height 2050 mm and 3200 mm when lifted. Floor space approx. 800 X 1500 mm. Technical documentation and CE declaration of conformity are supplied with machine. Mixing can is not included.

Location: Central Europe

Add to Cart View Details

37.0 kW PERRYmix Model DS-300 EX Dissolver, ATEX Rated, New

37.0 kW PERRYmix Model DS-300 EX Dissolver, ATEX Rated, New

Stock #HG62240

Brand new stainless steel PERRYmix dissolver model DS-300 EX, working capacity up to 1200 L depending on dispersed product viscosity. Stainless steel din 1.4301 mixing shaft with stainless steel toothed disc agitator diameter 400 mm driven by EL. Motor 37,0kW/3PH/400V/50HZ/IP54/1475rpm. Equipped by frequency convertor and then shaft rotates from 120 to 1200 rpm. Hydraulically lifted arm. Can holding/fixing device included. Also includes local control panel (Atex rated) and electrical switchboard (NON Atex, has to be installed out of danger zone). Height 2050 mm and 3200 mm when lifted. Floor space approx. 800 X 1500 mm. Technical documentation and CE declaration of conformity are supplied with machine. ATEX classification: Ex II 2G IIB T3. Mixing can is not included.

Location: Central Europe

Add to Cart View Details

45.0 kW PERRYmix Model DS-300 EX Dissolver, ATEX Rated, New

45.0 kW PERRYmix Model DS-300 EX Dissolver, ATEX Rated, New

Stock #HG62239

Brand new stainless steel PERRYmix dissolver model DS-300 EX, working capacity up to 1400 L depending on dispersed product viscosity. Stainless steel din 1.4301 mixing shaft with stainless steel toothed disc agitator diameter 450 mm driven by EL. Motor 45,0kW/3PH/400V/50HZ/IP54/1475rpm. Equipped by frequency convertor and then shaft rotates from 120 to 1200 rpm. Hydraulically lifted arm. Can holding/fixing device included. Also includes local control panel (Atex rated) and electrical switchboard (NON Atex, has to be installed out of danger zone). Height 2050 mm and 3200 mm when lifted. Floor space approx. 800 X 1500 mm. Technical documentation and CE declaration of conformity are supplied with machine. ATEX classification: Ex II 2G IIB T3. Mixing can is not included.

Location: Central Europe

Add to Cart View Details

52.0 kW MTI Model MD-Z4-1400/ADD Mixer

52.0 kW MTI Model MD-Z4-1400/ADD Mixer

Stock #HG59294

Used MTI model MD-Z4-1400/add carbon steel jacket vertical mixer. Total capacity 1400 litres, working capacity approximately 980 litres. Mixer, has bolted dished top and welded bottom heads. Carbon steel jacket rated 0,5 bar max. Pressure. Bottom discharge with pneumatic operated Ball valve. Unit equipped with 3 agitators: (1) anchor agitator with scraper stirrer driven by 33/52 kW motor. (1) mixing shaft with 2 X toothed disc agitator driven by 11 kW motor. (1) mixing shaft with vertical 2X spiral agitator by 7 kW motor. mixer including: control panel and electrical box.

Location: Central Europe

Add to Cart View Details

82.0 kW MTI Model P-Z9-630-ADD High Viscosity Mixer

82.0 kW MTI Model P-Z9-630-ADD High Viscosity Mixer

Stock #HG62159

Used MTI model P-Z9-630-ADD stainless steel jacketed mixer for high viscosity products. Stainless steel mixing bowl/can with carbon steel jacket has total capacity 630 litres, working capacity approx. 500 litres, rated -1 bar at max temperature 95°C. Can measures approx. 940 mm internal diameter x 900 mm straight side, mounted on (4) wheels. Has carbon steel jacket rated 3 bar at 95°c max temperature. Equipped by hydraulic powerpack for raise and lower main arm driven by el. motor 1,35 kW. Includes local control start/stop control panel and electrical switchboard. Total height whit lifted arm: 3500 mm. Unit equipped by (3) shafts with agitators following specification: (1) anchor agitator with wall scraper stirrer, 19 rpm. Driven by el. motor 10 kW 380/3/50hz 1465 rpm. (1) mixing shaft with (1) toothed disc agitator diam. 200 mm and (1) three piched blades agitator, 400 - 1200 rpm, driven by el. motor 58 kw 380/3/50hz. (1) mixing shaft with high shear mixer, diam. 200 mm, 294 rpm. driven by el. motor 17,5 kw 380/3/50. Transport dimensions: 3100 mm lenght x 2200 width x 2400 mm high, total weight 6500 kg.

Location: Central Europe

Add to Cart View Details

Dispersion Mixers - Post Europe - Europe

 0.1 kW Silverson Type L2R Stainless Steel Laboratory High Shear Mixer

0.1 kW Silverson Type L2R Stainless Steel Laboratory High Shear Mixer

Stock #L1562-02

Perry is offering a high quality, used Silverson model L2R stainless steel laboratory high shear mixer. Silverson is a world leading manufacturer of mixing equipment. This unit is ready to run and a video is available below. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Newton Aycliffe, UK

Add to Cart View Details

Used Netzsch Max Shear Inline Disperser

Used Netzsch Max Shear Inline Disperser

Stock #L1502-02

Perry is offering a high quality, used Netzsch Max Shear 3 Inline disperser. Netzsch is a leading European manufacturer of mixing equipment. This unit includes a stainless steel inline mixer with 76mm diameter slotted disintegrating head direct driven by 4 kw 415 volt 2885rpm 3/50 motor. Also includes double acting mechanical seal with 2.6 litre seal pot rated 10 bar at 60 deg.c. Mounted on stainless steel frame. This unit is ready to run and a video is available below. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Perry England Warehouse

Add to Cart View Details

Used Homogenizing Vertical Agitator

Used Homogenizing Vertical Agitator

Stock #U2384-2

Used vertical homogenizing agitator. Working length of the shaft is 125 cm. Shaft is designed in stainless steel. Four supporting bars are designed in carbon steel. Agitator is equipped with stainless steel cage - height 70 mm x outside diameter 185 mm x diameter of bottom inlet diameter 110 mm. Inside the cage there is a stainless steel 6 blade turbine. Shaft is directly driven via el. motor, which is mounted in frame, which makes possible hang agitator. Shipping dimensions: L 200 cm x diameter 60 cm.

Location: Perry Poland Warehouse

Add to Cart View Details

Used 37 Kw Twin Shaft Dissolver Kofama Model MD1000

Used 37 Kw Twin Shaft Dissolver Kofama Model MD1000

Stock #U2383-2

Used twin shaft dissolver by Kofama type MD1000. Machine has two carbon steel shafts, each equipped with toothed disc agitator. Each disc has a diameter 340 mm. Co-rotating discs, each works with 800 rpm. Shafts are belt driven by el motor 37 kW, 1475 rpm, 380 V, 50 hz . Ex design. Agitators are risen hydraulically but hydraulic device is missing. Machine is designed for work on 1000 l pans. Top cover of belt pulleys is missing. Last time used on paint production.

Location: Perry Poland Warehouse

Add to Cart View Details

Hp 0.37 - VORTEX Stainless steel Dissolver Type POMV

Hp 0.37 - VORTEX Stainless steel Dissolver Type POMV

Stock #VB0007-156

Used VORTEX Stainless steel dissolver-Type POMV - No. 1284-0.25 kw - Hp 0.37 - 1x 220 volts-Variable speed-On telescopic stand- 3 blade agitatior - With tank support-With electrical cabinet

Location: NEUVILLE EN FERRAIN - FRANCE

Add to Cart View Details

Greaves Model VHSD-10 Stainless Steel High Speed Disperser

Greaves Model VHSD-10 Stainless Steel High Speed Disperser

Stock #L1502-01

Perry is offering a high quality, used Greaves Model VHSD-10 stainless steel high speed disperser. Greaves is the UK's leading designer and manufacturer of high specification mixing systems, vessels and pressure reactors. This unit includes 2 x Interchangable Stainless steel mixing shafts with 1 tier stainless steel agitator driven by a 7.5 kw 3/50 415 Volt 2860 rpm motor. Also includes approximately 22.5 litre and 45 litre jacketed stainless steel mixing pots. Electrically driven Raise/lower. Can holding/fixing device included. Also includes Tool Temp Type TT-180 oil heater and Becker type U3 25 SA vacuum pump. This unit is ready to run and a video is available below. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Perry England Warehouse

Add to Cart View Details

Used Vertical Stainless Steel Contact Parts Lab Size Agitator With Five Stainless Steel Mixing Tanks

Used Vertical Stainless Steel Contact Parts Lab Size Agitator With Five Stainless Steel Mixing Tanks

Stock #U2402-17

Used vertical stainless steel contact parts lab size agitator. Machine is belt driven by el motor 1.1 kW, 1390 rpm, 380 V, 50 hz, Ex design (ExdI /IIBT5). Agitator is hydraulically risen/lowered, by manually operated pump. Working rotation is mechanically adjustable. Agitator has two stainless steel mixing shafts with two blades proppelers/paddles. There are also five stainless steel mixing tanks, each total volume 33 l and working volume 20 l. Machine is mounted on carbon steel supporting foot. Last time used in cosmetic industry.

Location: Perry Poland Warehouse

Add to Cart View Details

0.7 kW Silverson Model BX Stainless Steel Mixer

0.7 kW Silverson Model BX Stainless Steel Mixer

Stock #L1573-03

Used Silverson type BX stainless steel high shear mixer. Unit has approximately 560mm long stainless steel shaft. Has 70mm diameter stainless steel general purpose disintegrating head direct driven by 0.7kw motor.

Location: Newton Aycliffe, UK

Add to Cart View Details

1.1 kW Gronfa Type DSM 1100 Stainless Steel Wall Agitator

1.1 kW Gronfa Type DSM 1100 Stainless Steel Wall Agitator

Stock #U2244-4

Used stainless steel wall mounted agitator by Gronfa Procestechniek (Netherlands) type DSM 1100. Machine has a stainless steel shaft with length 560 mm. Mixing die has diameter 110 mm. Shaft is directly driven by el. motor 1.1 kW, 2760 rpm, 220/380V, 50 hz. Machine is equipped with stainless steel mixing pan with total volume 26 l and working volume about 20 l. Internal dimensions of mixing pan: diameter 273 mm x depth 445 mm. Pan is raised and lowered by pneumatic acuator and manually tilt for discharge. Agitator is mounted on stainless steel frame mounted on 4 bolts to the wall. Equipped with local control panel.

Location: PL

Add to Cart View Details

1.1 kW Silverson Model DX Stainless Steel Mixer

1.1 kW Silverson Model DX Stainless Steel Mixer

Stock #L1542-01

Perry is offering a high quality, used Silverson model DX stainless steel high shear mixer. Silverson is a world leading manufacturer of mixing equipment. This unit has an approximately 100mm diameter emulsifier head with 3mm holes. Stainless steel shaft approximately 675mm long. Direct driven by approximately 1.1kw, 380volt, 3/50 motor. Unit is mounted in mobile lifter. This unit is ready to run and a video is available below. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group

Location: Newton Aycliffe, UK

Add to Cart View Details

1.1 kW Silverson Model RBX 400 Abramix Stainless Steel Mixer

1.1 kW Silverson Model RBX 400 Abramix Stainless Steel Mixer

Stock #L1479-01

Perry is offering a high quality, used Silverson Model RBX 400 stainless steel Abramix high shear mixer. Silverson is a world leading manufacturer of mixing equipment. This units shaft is approximately 750mm long x 100mm diameter general purpose disintegrating head. Unit is direct driven by 1.1kw 220-240/300-420 volt 3/50 1410 rpm motor. Also includes spare square hole high shear head. Designed for processing highly abrasive materials. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Perry England Warehouse

Add to Cart View Details

1.5kW Unishear Stainless Steel Mixer

1.5kW Unishear Stainless Steel Mixer

Stock #L1479-02

Perry is offering a high quality, used Unishear stainless steel high shear mixer. Unishear is a leading manufacturer of mixing equipment. This units shaft measures approx 650mm long x 75mm diameter mixing head. Unit is direct driven by 1.5kw 240-415volt 3/50 2850rpm motor. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Perry England Warehouse

Add to Cart View Details

2.3 kW Molten Type TM5 RP.SV Twin Shaft Planetary Dissolver

2.3 kW Molten Type TM5 RP.SV Twin Shaft Planetary Dissolver

Stock #U2301-1

Second hand stainless steel contact parts twin shaft planetary dissolver by Molteni type TM5 RP.SV. Mixer has stainless steel jacketed mixing pan with internal diameter 207 mm x depth 213 mm. Total volume of pan is 7 l, working volume about 5 l. Mixing pan has side wall bottom discharge outlet. Mixer has two agitators with toothed discs and one wall scrapper. Toothed discs have diameter 100 mm and are driven by vari speed gearbox and two speed el. motor 1.75/1.4 kW, 2800/1400 rpm, 380 V, 50 hz, in EEx-d II B T4. Working rotation of disc agitators manually adjustable in range from 300 up to 4800 rpm. Wall scrapper is driven by el motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz (design EEx-d II B T5) through reducer with ratio i= 44.77, what gives output rotation at 32 rpm. Agitators are risen by hydraulical device driven by el. motor 0.26 kW, 1360 rpm, 220/380 V, 50 hz, EEx-d II B T5 design. Machine is equipped with local control panel and pneumatic vacuum pump by Piab. Machine is mounted on steel mobile cabinet. Additional equipment included with mixer: pneumatically operated press for emptying mixing pan, stand for emptying/cleaning mixing pan.

Location: Perry Poland Warehouse

Add to Cart View Details

3 kW Netzsch Model PMD VC50 Stainless Steel Pre-Mix Disperser

3 kW Netzsch Model PMD VC50 Stainless Steel Pre-Mix Disperser

Stock #L1374-02

Perry is offering a high quality, used Netzsch PMD VC50 stainless steel pre-mix disperser with approximately 15-50 litre working capacity. Netzsch is a leading European manufacturer of mixing equipment. This unit has a welded conical bottom and clamped dished top heads. Unit has top entry stainless steel dispersion disc type agitator driven by a 3kw 3/50 1430rpm motor. Has bottom entry stainless steel scraped surface agitator driven by a 1.5kw 3/50 motor. Includes hydraulic powerpack driven by 0.55kw 3/50 motor for raise and lower. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Perry England Warehouse

Add to Cart View Details

4.0 kW Silverson Type Stainless Steel High Shear Mixer

4.0 kW Silverson Type Stainless Steel High Shear Mixer

Stock #L1387-03

Perry is offering a high quality, used Silverson type stainless steel high shear mixer. Silverson is a world leading manufacturer of mixing equipment. This unit has an approximately 165mm diameter 4-blade mixer and 950mm long shaft with standard emulsor head but no screen fitted. Direct driven by a 4kw 2850rpm 3/50 motor. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Perry England Warehouse

Add to Cart View Details

4 kW Stainless Steel Mixer

4 kW Stainless Steel Mixer

Stock #L1573-04

Used stainless steel high shear mixer. Has 1,000mm long stainless steel shaft with 110mm diameter stainless steel mixing head and screen. Unit is direct driven by 4kw motor.

Location: Newton Aycliffe, UK

Add to Cart View Details

4kW Silverson Model FX Type Stainless Steel Mixer

4kW Silverson Model FX Type Stainless Steel Mixer

Stock #L1554-04

Perry is offering a high quality, used Silverson Model FX type stainless steel high shear mixer. Silverson is a world leading manufacturer of mixing equipment. This unit is direct driven by a 4kw motor. Approximately 150 litre high viscosity and 1200 litre low viscosity batches. Mounted on Silverson Type F mobile stand with manual hydraulic raise and lower. This unit is ready to run and a video is available below. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Newton Aycliffe, UK

Add to Cart View Details

4kW Silverson Model FX Stainless Steel Mixer

4kW Silverson Model FX Stainless Steel Mixer

Stock #L1564

Perry is offering a high quality, used Silverson Model FX stainless steel high shear mixer. Silverson is a world leading manufacturer of mixing equipment. This unit is direct driven by an approximately 4kw motor. Approximately 150 litre high viscosity and 1200 litre low viscosity batches. Unit is mounted on Silverson Type F mobile stand with manual hydraulic raise and lower. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Newton Aycliffe, UK

Add to Cart View Details

5.5 kW Stainless Steel High Shear Mixer

5.5 kW Stainless Steel High Shear Mixer

Stock #L1535-03

Perry is offering a high quality, used stainless steel high shear mixer. This unit has an approximately 130mm diameter disintegrator head that has approximately 25mm holes. Stainless steel shaft approximately 760mm long. Direct driven by a 5.5kw 2880rpm 3/50 motor. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Newton Aycliffe, UK

Add to Cart View Details

5.5kW Silverson Model FX Stainless Steel Mixer

5.5kW Silverson Model FX Stainless Steel Mixer

Stock #L1554-03

Perry is offering a high quality, used Silverson Model FX stainless steel high shear mixer. Silverson is a world leading manufacturer of mixing equipment. This unit is direct driven by a 5.5kw motor. Approximately 150 litre high viscosity and 1200 litre low viscosity batches. Mounted on Silverson Type F mobile stand with manual hydraulic raise and lower. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Newton Aycliffe, UK

Add to Cart View Details

7.5 kW Greaves Type Stainless Steel Turbo Mixer

7.5 kW Greaves Type Stainless Steel Turbo Mixer

Stock #L1463-03

Perry is offering a high quality, used Greaves type stainless steel turbo mixer. Greaves is the UK's leading designer and manufacturer of high specification mixing systems, vessels and pressure reactors. This unit has a stainless steel six blade rotor with double flights and 8 hole stator. Unit direct driven by approximately 7.5kw motor. This unit is ready to run and a video is available below. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Newton Aycliffe, UK

Add to Cart View Details

8/11 kW Gunter Papenmeier Stainless Steel Conical Mixer 150 Litre

8/11 kW Gunter Papenmeier Stainless Steel Conical Mixer 150 Litre

Stock #U2226-5

Used stainless steel conical mixer by Gunter Papenmeier type No3 150 with total volume 150 l. Mixer has welded elipsoidal top, bolted to conical bottom. At the top there is installed a belt driven propeller agitator. Agitator is driven by two speed electric motor 8/11 kW , 1460/2938 rpm, 380 V, 50 Hz. Mixer has two inspection manways with lids, each with diameter 250 mm. One manway has installed cleaning nozzle in the lid. Mixer has wall side discharge outlet with diameter 120 mm, equipped with valve and discharge pipe. Mixer is mounted on 3 lugs.

Location: PL

Add to Cart View Details

11 kW Test SA Type MP-11/1000EX Disc Agitator

11 kW Test SA Type MP-11/1000EX Disc Agitator

Stock #UG6276

Used vertical disc agitator/dissolver by Test SA (PL) type MP-11/1000Ex. Machine can work on 1000 l mixing pans and is equipped with disc agitator. Driven by motor 11 kW, 1440 rpm. Working rotation of agitator adjusted in range from 0-1000 rpm. Mechanical rising and lowering of agitator up to height 1250 mm. Dimensions: H 3180 mm x W 800 mm x L 1200 mm. Ex proof design - ExII2GcIIBT3. Includes technical documentation. New 2014. Mixing pan not included.

Location: PL

Add to Cart View Details

11 kW Greaves Model SH 15 Stainless Steel High Shear Mixer, Used Refurbished

11 kW Greaves Model SH 15 Stainless Steel High Shear Mixer, Used Refurbished

Stock #L1486-06

Perry is offering a high quality, refurbished, used Greaves Model SH 15 stainless steel high shear mixer. Greaves is the UK's leading designer and manufacturer of high specification mixing systems, vessels and pressure reactors. Shaft approximately 1750mm long x 150mm diameter general purpose disintegrating head. Unit is direct driven by 11kw 415volt 3/50 2950rpm motor. Reportedly suitable for 500-2000 litre batches. This unit is ready to run and a video is available below. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Newton Aycliffe, UK

Add to Cart View Details

11 kW Mastermix Carbon Steel Pre-Mix Disperser

11 kW Mastermix Carbon Steel Pre-Mix Disperser

Stock #L0678-04

Perry is offering a high quality, used Mastermix approximately 1500 litre capacity carbon steel pre-mix disperser. Mastermix is a leading manufacturer of mixing equipment. This units disperser is driven by a 11kW, 1440rpm, 415V electric motor. Scraper agitator driven by a 7.5kW, 1450rpm, 380/440V electric motor through a Renolds gearbox ratio 49-2. Mixing vessel measures approx 1200mm diameter X 1500mm straight side. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: UK

Add to Cart View Details

11 kW Mastermix Carbon Steel Pre-Mix Disperser

11 kW Mastermix Carbon Steel Pre-Mix Disperser

Stock #L0678-03

Perry is offering a high quality, used Mastermix approximately 1500 litre capacity carbon steel pre-mix disperser. Mastermix is a leading manufacturer of mixing equipment. This units disperser is driven by a 11kW, 1440rpm, 415V electric motor. Scraper agitator driven by a 7.5kW, 1450rpm, 380/440V electric motor through a Renolds gearbox ratio 49-2. Mixing vessel measures approx 1200mm diameter X 1500mm straight side. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: UK

Add to Cart View Details

15 Kw Dissolver Netzsch With 500 L Stainless Steel Mixing Pan

15 Kw Dissolver Netzsch With 500 L Stainless Steel Mixing Pan

Stock #U2383-1

Used dissolver by Netzsch. Machine is driven by el motor 15 kW, 1470 rpm, 380 V, 50 hz in Ex design. Machine has stainless steel shaft with working length 740 mm and toothed disc agitator with diameter 450 mm. Agitator is rised hydraulically up to 100 cm. Machine is equipped with stainless steel mixing pan with working volume 500 l, diameter 940 mm x length of straight side of wall 760 mm. Mixing pan has side wall discharge outlet with ball valve. Mixer is equipped with carbon steel lid, mounted on 6 bolts. Lid has inspection manway and connection for vacuum pump. Machine has local control panel, electric cabinet and vacuum pump. Last time used on paints.

Location: Perry Poland Warehouse

Add to Cart View Details

18.5 kW Mastermix 316L Stainless Steel High Shear Mixing Vessel

18.5 kW Mastermix 316L Stainless Steel High Shear Mixing Vessel

Stock #L1061-03

Perry is offering a high quality, used Mastermix approximately 900 litre 316L stainless steel high shear mixing vessel. Mastermix is a leading manufacturer of mixing equipment. The unit has an approximately 900mm diameter X 1300mm straight side. Has welded dished bottom and bolted dished top heads. Includes Sawtooth blade mixer belt driven by 25HP (18.5 kW) 380/440 volt 3/50 1440 rpm motor. Mounted on (3) support lugs. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Perry England Warehouse

Add to Cart View Details

45 KW Buhler Mixer Type SPM-50-HT With Butterfly Agitator For Work On Vacuum

45 KW Buhler Mixer Type SPM-50-HT With Butterfly Agitator For Work On Vacuum

Stock #U2347-1

Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included.

Location: Perry Poland Warehouse

Add to Cart View Details

45 KW Buhler Mixer Type SPM-50-HT With Butterfly Agitator For Work On Vacuum

45 KW Buhler Mixer Type SPM-50-HT With Butterfly Agitator For Work On Vacuum

Stock #U2347-2

Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included.

Location: Perry Poland Warehouse

Add to Cart View Details

48 KW Stainless Steel Netzsch Mixer Type VPI 550 With Butterfly agitator

48 KW Stainless Steel Netzsch Mixer Type VPI 550 With Butterfly agitator

Stock #U2347-3

Used mixer by Netzsch (DE) type VPI 550 with butterfly/tri-foil agitator. Mixer has contact parts designed in stainless steel. Shaft has a working length 650 mm and is equipped with butterfly agitator, with three paddles and external diameter 1080 mm. Agitator is driven by el. motor 48 kW and is hydraulically risen up to about 130 cm. Machine is equipped with local control pane and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Mixing pan is not included.

Location: Perry Poland Warehouse

Add to Cart View Details

55 kW Netzsch Model PMD-VC 7500 FLP Stainless Steel Pre-Mix Disperser

55 kW Netzsch Model PMD-VC 7500 FLP Stainless Steel Pre-Mix Disperser

Stock #L0969-01

Perry is offering a high quality, used Netzsch model PMD-VC 7500 FLP stainless steel pre-mix disperser. Netzsch is a leading European manufacturer of mixing equipment. This unit has an approximately 1800-7500 litre working capacity. Has bolted dished top and welded inverted Cone bottom heads. Unit includes top driven disperser agitator hydraulically driven by 55 kW 415 volt 3/50 1470 rpm motor. Also includes bottom driven anchor agitator belt driven by 11 kW 415 volt 3/50 970 rpm motor and gearbox. Has hydraulic powerpack direct driven by 0.55 kW 415 volt 3/50 2830 rpm motor for raise/lower. Has stainless steel external coil heating/cooling jacket. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Perry England Warehouse

Add to Cart View Details

55 kW Litre Netzsch Model PMD-VC 7500 FLP Stainless Steel Pre-Mix Disperser

55 kW Litre Netzsch Model PMD-VC 7500 FLP Stainless Steel Pre-Mix Disperser

Stock #L0969-02

Perry is offering a high quality, used Netzsch model PMD-VC 7500 FLP stainless steel pre-mix disperser. Netzsch is a leading European manufacturer of mixing equipment. This unit has an approximately 1800-7500 litre working capacity. Has bolted dished top and welded inverted Cone bottom heads. Unit includes top driven disperser agitator hydraulically driven by 55 kW 415 volt 3/50 1470 rpm motor. Also includes bottom driven anchor agitator belt driven by 11 kW 415 volt 3/50 970 rpm motor and gearbox. Has hydraulic powerpack direct driven by 0.55 kW 415 volt 3/50 2830 rpm motor for raise/lower. Has stainless steel external coil heating/cooling jacket. This unit is ready to run. Perry has been supplying this type of equipment for decades. You can rely on getting a first class service from the Perry Equipment Group.

Location: Perry England Warehouse

Add to Cart View Details

56.0 kW Oliver Y Batlle 75 Dispermix Dissolver, Used

56.0 kW Oliver Y Batlle 75 Dispermix Dissolver, Used

Stock #RG1078

Used Oliver Y Batlle 75 Dispermix stainless steel dissolver. Hydraulic unit attached to the base actuates the piston of the column with a pressure of 8-10 bar. The lifting height of the piston is 1.5 m. 180º turning angle. Cowless agitation. Main motor power: 75 hp - 380 V - 50 Hz - 1500 rpm. Head lifting motor power: 3.4 cv - 380 V - 50 Hz. Disc elevation: 1500. Air pressure: 5-7 bar. 2 x 3,000 litre stainless steel mixing vessels.

Location: EU

Add to Cart View Details

18,5 Kw Homogenizing Mixer Millchem Ex

18,5 Kw Homogenizing Mixer Millchem Ex

Stock #U2384-1

Used stainless steel contact parts homogenizing mixer by Millchem (UK), model FMG 25 HD. Machine has mixing shaft and three supporting bars, designed in stainless steel. Working length of shaft is 995 mm. Total length 1295 mm. Shaft is driven directly by el motor 18,5 kW, 1460 rpm, 380 V, 50 hz. Ex design - EExd11BT4. Machine is equipped with mixing stainless steel cage - outside diameter 296 mm x height 100 mm. Inside the cage, there is working a three blade turbine. Bottom plate of cage is solid, with 6 inlet perforation. Inside the cage - bottom plate has grinding surface. Whole agitator is hydraulically rised/lowered in range 104 cm, via hydraulic device, driven by el motor with power 1.1 kW (Ex design - EExd11BT4). Mixer is equipped with stainless steel mixing pan with total volume 1300 l. Inside diameter 1176 mm x length of straight side of wall 1246 mm. Pan has side wall discharge outlet and inclined bottom. Machine is mounted on carbon steel supports. Has local control panel and plastic top cover for mixing pan.

Location: Perry Poland Warehouse

Add to Cart View Details

500 L Dissolver By Oliver & Battle With Mixing Pan And Vacuum Pump

500 L Dissolver By Oliver & Battle With Mixing Pan And Vacuum Pump

Stock #U2416

Used dissolver by Oliver+Batlle S.A.(ES) type DISPERMIX 50 designed for work on vacuum. Machine has non-corrosive shaft with working length 144.5 cm. Shaft is belt driven by el motor 40 kW, 1470 rpm, 380/660 V, 50 hz. Ex design of motor (ExeG). Mechanical adjustment of shaft rotation. Shaft is equipped with stainless steel toothed disc, with diameter 350 mm. Rising and lowering of agitator in range 110 cm and is driven hydraulically. Machine has also lid cover, with diameter 108.5 cm, for work on vacuum, rised and lowered by two hydraulical actuators. Together with mixer there are: - vacuum pump Pfeiffer Vacuum model Hena 200, output up to 240 m3/h, driven by el motor 5.5 kW. - stainless steel mixing pan with volume 500 l. Mounted on 4 leg, no bottom discharge outlet. - local control panel integrated with two hydraulic devices.

Location: Perry Poland Warehouse

Add to Cart View Details

1300 litre Stainless Steel Millchem Dissolver Type FMG25HD.

1300 litre Stainless Steel Millchem Dissolver Type FMG25HD.

Stock #VB0001-08

Used Stainless Steel Millchem Dissolver type FMG25HD. Driven by a 22/15kW, 380V, 1500/750 rpm motor. Stainless Steel Turbine has a diameter of approximately 300mm. Supplied with (1) stainless steel tank with a capacity of approximately 1300 litres measuring 1180mm diameter x 1240mm. Supplied with an electrical control cabinet.

Location: NEUVILLE EN FERRAIN - FRANCE

Add to Cart View Details

1300 L  Mixing Post IKA Turrax With Pump

1300 L Mixing Post IKA Turrax With Pump

Stock #U2387-1

Used mixing station for liquids. Station consist of vertical stainless steel mixing tank with total volume 1300 l. Internal diameter 1170 mm x length of straight side of wall 1140 mm. Bottom elipsoidal, with central discharge outlet. Tank is mounted on three stainless steel legs, on tension cells. On side walls there are welded four baffles. Mixing is provided by homogenizing agitator by IKA (DE) model Turrax UTC TMP 150 / 2KT, driven directly by 11 kW, 2915 rpm, 380/660 V, 50 hz. Length of the shaft 900 mm x diameter of mixing die 150 mm. Agitator is mounted on stainless steel supporting frame. Discharge from tank is provided by sinusoidal stainless steel contact parts pump by Masosine Process Pumps model SP 25, working on pressure up to 15 bar. Working rotation up to 600 rpm. Pump is driven by 2.2 kW, 1400 rpm, 220-380 V, 50 hz. Working rotation of drive up to 233 rpm. Pump has connections (inlet/outlet) with diameter 80 mm. Station includes also stainless steel container lifter by Nagema (DE). Working rising height up to 150 cm. Unit can work on rectangular containers with width 70 cm. Station is equipped with two control panels. Last time had been working in food industry.

Location: Perry Poland Warehouse

Add to Cart View Details


Dispersion Mixers - Post Europe - USA

15 kW Netzsch Model PMD Pharma 50 Stainless Steel Pre-Mix Disperser

15 kW Netzsch Model PMD Pharma 50 Stainless Steel Pre-Mix Disperser

Stock #B0044-06

Used Netzsch model PMD Pharma 50 stainless steel pre-mix disperser approximately 50 litre working capacity. Jacketed chamber with mechanical seal. Has welded conical bottom and bolted dished top heads. Unit has top entry stainless steel agitator driven by a 15kw 3/50 2900rpm motor. Includes hydraulic powerpack driven by a 1.1kw 3/50 1415rpm motor for agitator raise and lower. Has bottom entry stainless steel scraped surface agitator driven by a 1.35kw 3/50 142-1420rpm motor.

Location: NEUVILLE EN FERRAIN - FRANCE

Add to Cart View Details